NEWS

Recent years have seen the increasingly harsh climate conditions and frequent bad weathers such as smog, acid rain, and rainstorms. This has aroused attention. Why do these happen? In fact, they are closely related to the construction and decoration materials.

The installation of honeycomb panel

Punching aluminum veneer: As a member of the aluminum veneer category, punching aluminum veneer has almost all the advantages of this product line. They are light weight, corrosion resistance, high-temperature resistance, good chemical stability, easy installation and maintenance, excellent decorative effect, etc. The surface of the punching aluminum veneer is mechanically perforated. In addition to making it look elegant, such a treatment helps reduce noises. This is a key for the product to be widely applied.

Aluminum curtain wall veneer: Just as the enclosure of the external wall of the building, it has no load-bearing capability. It hangs like a curtain, for which it is called "curtain wall." This kind of wall is always seen in modern large buildings. The aluminum curtain wall veneer is built by panels and a supporting structure mainly. It offers no support to the main structure of the building. It widely applies to the exterior wall, lighting roof or cover, and awning of the building.

Aluminum plates are mainly used in the interlayer position and roof position;

Aluminum veneers are divided into two types according to specifications: aluminum veneers with a thickness of 1.2 mm or less are called aluminum gusset plates (also called aluminum square plates), and aluminum veneers with a thickness of 1.5 mm or more are called aluminum veneers (also called aluminum veneers). Aluminum pull net). The aluminum veneer is made of high-quality high-strength aluminum alloy plate. Its common thickness is 1.5, 2.0, 2.5, 3.0MM, the model is 3003, and the state is H24. Its structure is mainly composed of panels, ribs and corner codes. The corner code can be bent or stamped directly from the panel, or it can be angled on the small side of the panel. The reinforced ribs and the electric welding screws behind the board surface (the screws are directly welded to the back of the board surface) make it a solid whole, which greatly enhances the strength and rigidity of the aluminum single board pulling net, ensuring long-term use. Flatness and resistance to wind and earthquake.