aluminum wall panels Enclosed Trailer Wall Construction

by:Carlos     2019-04-01
This is the first article of a tenthThe -part series discusses the various components of closed trailers and their relationship to long chainsTrailer stability.One of the most important parts of a closed trailer is its wall structure.. There are many combinations of wall structures. Most enclosed trailers will use aluminum,steel, galvanized steel is sometimes called Galvaneal; or FRP. For wall beams, using steel or aluminum. Plywood attached to the beam, 栾, aluminum or a combination of these.ExteriorThe most common is the aluminum casing. Usually within the thickness range0.024-.050, aluminum is the most common form of appearance. It is very durableFor a long time, not rusting. It is the lightest material used to close the outside of the trailer. These are applied to the panel using screws,rivet, 3M tape or industrial epoxy resin. The use of thicker exterior aluminum generally improves trailer stability and extends the aesthetics of the trailer. FRP(glass fiber reinforced plasticIs a fiberglass wall that is longer than the duration and easy to repair. FRP is usually only white. Steel and galvanized steel are usually the least desirable outside because they rust and tend to deteriorate quickly.Cross memberThe material used to construct the wall beams is made of steel or aluminum. Use z to achieve steel grade-channelHat column or box tube. The hat is implemented using the same steel structure as the road signAnd z-channel is a hat cut in half. The box tube has steel on all four sides and is generally considered to be the most desirable due to its strength.. z-channel is the most undesirable because of their strength, while the hat column is a cost compromise between the tube tube and z-channel. Wall-mounted equipment for commercial use or for your application, the box tube is a must. usually, enclosed trailer with hot column zOver time, channels tend to make their appearance "wavy". general, horizontal members in the center 16". Some manufacturers use 24" centersIf they also use z, consumers should be wary of these trailers- Due to lack of strength, behind the passage or hat.Wall MaterialsusuallyWith hat and z-channel, the walls will be plywood reinforced. Plywood will increase the weight of luan and tube tube. Long-term lookIf the trailer is used frequently because of increased fuel costs, it is more economical to pay more for the box wall trailer.. The interior aluminum walls are beautiful and easy to clean. Some trailers offer a white vinyl coating on the luan called the designer board.. These walls are also easy to clean and cost less than aluminum.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...