aluminum panels Dry Ice Blast Cleaning In Weld Line And Heavy Fabrication Operations

by:Carlos     2019-04-09
Is a fast-paced,Production oriented environment.Jobs are time-sensitive,The high level of technology and quality is a matter of pride, every profession, creating nothing.Machinery from raw steel and a set of drawings,Industrial oven,Heavy-duty construction equipment and any quantity of stuff manufactured from steel,iron,Aluminum and copper.As charming and fast-The rhythm of this industry, in any case 'clean' welders beads may be

Waste caused by welding and manufacturing:slag waste,carbon dust,solvent-borne over-spray,e-coat,Barrier coatings and other waste materials are secondary in the manufacturing process.For the following:At the corpse shop,We can clean the robot effectively.weld fixtures,Stamping fixture,and presses.The walls of the spray booth are always contaminated with all kinds of paint,coatings,chemicals,Solvent and excessive-spray.Rapid removal of these pollutants by CO2 blasting,efficiently,No downtime and no secondary hazardous waste creation.all old peel-coat,solvent-Over-painted at birth-spray,Enamel and epoxy from all the interior and exterior booth panels.Cleaning e-Coat and powder coat lines:Before drawing a carThe gray material on the frame of the car body is called e-coat.E-The coating is a protective layer applied to the frame before painting to prevent rust from attacking the frame of the car.Additionally,Roller and frame, carrying car frame also established e-through this process-coat.This sticky substance causes the whole process to be blocked and slow.When the drum slows down,Production downtime increased, inefficient.The typical cleaning method for roller assembly is high pressure water spray,or power-washing.Power-Washing adds hundreds of gallons of contaminated water to an already volatile and dangerous environment.Dry ice blasting cleaning can remove e-Without the addition of water, the pressure washing of the drum assembly cleaner can be maintained for a long time.Tool Cleaning:Dry ice blasting is a recommended solution.The traditional cleaning method of slag and splash is hammer and chisel.Wisely,In the process of their maintenance procedures.This is to prevent expensive damage to the mold.Dry ice explosion cleaning is a process that achieves this "no contact" initiative as dry ice is sprayed onto the surface to be cleaned and dried ice sublimated to eliminate any contact and secondary waste.Staff or floor fan:Large industrial fans are used in many manufacturing plants to keep the production area cool and keep the air circulating.These fans are constantly getting a build-Dirt and dirt on the blades cause inefficient circulation in the production field.If all these fans were cleanedTypical methods include removing the protective screen,Then clean each individual blade with a cleaning solution.This process usually takes more than an hour.Dry ice blasting cleaning can complete the same task in about 15 minutes.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...